In recent years, dental implants have helped traditional bridgework take a giant leap forward. A few strategically placed implants can provide the highest support and stability we can currently achieve for this well-known dental restoration.
Implants derive this stability from the bone in which they're imbedded. Once surgically installed, the bone around a metal implant begins to grow and adhere to its titanium surface. Over time, this creates a strong anchor that firmly holds the implant in place.
But the implants' stability can be threatened if the gums around them become diseased. Gum disease, a bacterial infection caused mainly by dental plaque, can advance silently below the gum surface until it ultimately infects the bone. This can cause significant bone loss around an implant, which can weaken it to the point of failure.
To avoid this scenario, it's important to prevent gum disease by flossing daily to remove accumulated dental plaque between the implant-supported bridge and the gums, particularly around the implants. This kind of flossing around bridgework is more difficult than flossing between teeth, but it can be done with the help of a device called a floss threader.
A floss threader is a small plastic hand tool with a loop on one end and a stiffened edge on the other (similar to a sewing needle). You begin by threading about 18" of dental floss through the loop, and then work the other end of the threader between the bridge and gums to the other side.
With the floss threaded between the bridge and gums, you can now remove it from the threader, grasp each end, and floss around the sides of each implant you can reach. You'll then need to repeat the process by removing the floss, rethreading it in the threader and inserting it into the next section between implants, continuing to floss until you've accessed each side of each implant.
You can also use pre-packaged floss thread sections with a stiffened end to facilitate threading. But whichever product you use, it's important to perform this task each day to prevent a gum infection that could rob you of your implant-supported bridge.
If you would like more information on oral hygiene practices with dental work, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Oral Hygiene for Fixed Bridgework.”
If you're into social media, you might have run across the idea that there's nothing to straightening your teeth. According to some SM influencers, you can even do it yourself with a few rubber bands. But the truth is, the mechanics of moving teeth are much more complex—and taking orthodontics into your own hands can cause extensive dental damage.
In reality, all bite problems (malocclusions) require the advanced knowledge and expertise of an orthodontist to correct them safely and effectively. Some, in fact, may require other devices along with braces or clear aligners to achieve the desired outcome for a particular malocclusion.
Here are a few of those additional tools an orthodontist may use and why they may be needed.
Headgear. Some malocclusions result not just from misaligned teeth, but problems with jaw or facial structure development. To accommodate additional factors like this, an orthodontist may include headgear during treatment, usually a strap running around the back of a patient's head or neck and attached in the front to brackets bonded to the teeth (usually the molars). Wearing this headgear for several hours a day can improve jaw and facial development.
Elastics. Unlike basic rubber bands DIYers might use to move their teeth (often with damaging results), elastics are specialized bands designed for targeted tooth movement. They're needed for bite problems that require moving some teeth and not moving others. As such, elastics can be applied in conjunction with braces to perform either intended task—move or prevent movement for specific teeth.
Anchorage. One of the tools often used with elastics for targeted tooth movement are temporary anchorage devices (TADs). These are typically tiny screws imbedded into the jawbone a short distance from fixed braces. An elastic band connected to the braces at a specific point is then attached to the TAD, which serves as an anchor point for the elastic.
These and other devices can help orthodontists achieve a successful correction for certain individual bite problems. And unlike the DIY methods touted on the Internet, these additional tools help them do it safely.
If you would like more information on straightening teeth through orthodontics, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Orthodontic Headgear & Other Anchorage Appliances.”
During the COVID-19 quarantines, stir-crazy celebrities have been creating some “unique” home videos—like Madonna singing about fried fish to the tune of “Vogue” in her bathroom or Cardi B busting through a human-sized Jenga tower. But an entertaining Instagram video from Kevin Bacon also came with a handy culinary tip: The just-awakened film and TV actor showed fans his morning technique for cutting a mango to avoid the stringy pulp that gets between your teeth. After cutting a mango in half, he scored it lengthwise and crosswise to create squares and then turned the mango inside out for easy eating.
With his mango-slicing video garnering over a quarter-million views, the City on a Hill star may have touched a nerve—the near universal annoyance we all have with food stuck between our teeth. Trapped food particles aren't only annoying, they can also contribute to a bacterial film called dental plaque that's the top cause for tooth decay and gum disease.
Unfortunately, it's nearly impossible to avoid stuck food if you love things like popcorn, poppy-seed muffins or barbecue ribs. It's helpful then to have a few go-to ways for removing food caught between teeth. First, though, let's talk about what NOT to use to loosen a piece of stuck food.
A recent survey of more than 1,000 adults found that when removing something caught between our teeth, we humans are a creative lot. The makeshift tools that survey respondents said they've used in a pinch included twigs, safety pins, screwdrivers and nails (both the hammer and finger/toe variety). Although clever, many such items are both unsanitary and harmful to your gums and tooth enamel, especially if they're metallic or abrasive.
If you want a safe way to remove unwanted food debris, try these methods instead:
Brush your teeth: The gentle abrasives in toothpaste plus the mechanical action of brushing can help dislodge trapped food.
Use dental floss: A little bit of dental floss usually does the trick to remove wedged-in food—and it's easy to carry a small floss container or a floss pick on you for emergencies.
Try a toothpick. A toothpick is also an appropriate food-removing tool, according the American Dental Association, as long as it is rounded and made of wood.
See your dentist. We have the tools to safely and effectively remove trapped food debris that you haven't been able to dislodge by other means—so before you get desperate, give us a call.
You can also minimize plaque buildup from food particles between teeth by both brushing and flossing every day. And for optimally clean teeth, be sure you have regular dental office cleanings at least twice a year.
Thanks to Kevin Bacon's little trick, you can have your “non-stringy” mango and eat it too. Still, you can't always avoid food getting wedged between your teeth, so be prepared.
If you've ever had a run-in with cavities, you know the drill (no pun intended): After getting a local anesthetic for pain, the dentist removes any decayed dental tissue, as well as some healthy tissue, and then fills the cavity to restore the tooth. It's an effective treatment protocol we've been using for well over a century.
It does, however, have its drawbacks. For one, although necessary, removing healthy dental tissue can weaken the overall tooth structure. The dental drill used during the procedure is also unpleasant to many people: Although it doesn't cause any pain thanks to the anesthetic, the sounds and pressure sensations associated with it can be unsettling.
But advances in dental tools, technology and techniques are addressing these drawbacks in traditional tooth decay treatment. In other words, treating a tooth with cavities today is taking on a lighter touch. Here are 3 reasons why.
Earlier detection. The key to effective treatment is to find tooth decay in its earliest stages. By doing so, we can minimize the damage and reduce the extent of treatment needed. To do this, we're beginning to use advanced diagnostic tools including digital x-rays, intraoral cameras and laser fluorescence to spot decay, often before it's visible to the naked eye.
Re-mineralizing enamel. One of the advantages of early detection is to catch tooth enamel just as it's undergoing loss of its mineral content (demineralization) due to contact with acid. At this stage, a tooth is on the verge of developing a cavity. But we can use minimally invasive measures like topically applied fluoride and CPP-ACP (a milk-based product) that stimulates enamel re-mineralization to prevent cavity formation.
Less invasive treatment. If we do encounter cavities, we no longer need to turn automatically to the dental drill. Air abrasion, the use of fine substance particles under high pressure, can precisely remove decayed material with less loss of healthy tissue than a dental drill. We're also using newer filling materials like composite resins that don't require enlarging cavities as much to accommodate them.
These and other techniques—including laser technology—are providing superior treatment of tooth decay with less invasiveness. They can also make for a more pleasant experience when next you're in the dentist's chair.
If you would like more information on effectively treating dental disease, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Minimally Invasive Dentistry.”
Missing teeth create gaps that can be unsightly and embarrassing. They can also irritate the mouth, unease in your bite while increasing mental and emotional distress. At Anderson Dental, our dentist may recommend a dental bridge to restore your smile, ability to speak and chew, as well as prevent remaining teeth from shifting out of place. These cosmetic restorations will not only benefit your appearance, but they'll give your oral health an additional boost. Please schedule a consultation with Dr. Jon Anderson, Dr. Brad Anderson, or Dr. Breding in our Fargo, ND, office today to get started.
What Is a Dental Bridge?
A dental bridge comes in different types. At Anderson Dental, our dentist will determine the kind that's best for your particular situation after performing an oral examination and taking X-rays. A dental bridge is a fixed artificial tooth that's supported by two crowns on each side to bridge the gap between one or more missing teeth. It's also considered an alternative to dental implants.
Benefits of a Dental Bridge
One or multiple teeth can devastate self-esteem and make you self-conscious about how others perceive you. One of the benefits of a dental bridge is that the procedure is non-surgical and involves minimal recovery time. They can also last a long time with proper at-home care and annual cleanings in our Fargo, ND, office. A dental bridge is also safe, comfortable, and has a durable reputation. Another advantage is that they prevent further oral problems from developing.
If you're tired of frowning, missing out on your favorite foods, and looking for a solution, consider treatment. You may be a candidate for a dental bridge, and Dr. Jon Anderson or Dr. Brad Anderson will confirm this during your initial visit.
For more information about other services provided at Anderson Dental, visit our website or call (701) 232-1368 for an appointment in our Fargo, ND, office.
This website includes materials that are protected by copyright, or other proprietary rights. Transmission or reproduction of protected items beyond that allowed by fair use, as defined in the copyright laws, requires the written permission of the copyright owners.